Rolling industrial gates MAXIROL – Single-walled
We offer rolling industrial gates MAXIROL in multiple versions. The lamellas the gates are made of can be manufactured of aluminium or steel sheet metal, or of extruded lamellas of the AlMgSi aluminium alloy that is significant with high rigidity. Depending on the dimensions of the gates the material strength is used in the range from 0.63 to 1.5 mm, and always 1.8 mm for extruded lamellas.
In the basic design, steel lamellas are zinc-coated, aluminium are without surface treatment in natural design. If you pay extra, the gates can be painted in any shade you choose from the RAL sampler.
Steel gates can be also manufactured of stainless premium steel.
The gates are usually mounted from inside of a building, and the winding of the shutter is located behind the lintel. Sometimes the gates can be placed on a façade of a building with a winding guard.
The gates are suitable for industrial halls, blocks of flats, garage compounds, etc.
ADVANTAGES:
- manufacture of gates precisely according to the building situation
- possibility of big dimensions, width up to 12 m
- the gates do not need any space under the ceiling; they do not obstruct crane tracks
- winding on a shaft, possibility of a floating shaft that saves the surface of lamellas
- possibility of parking in front of the door
- as standard with an industrial motor for high frequency of operation
- top quality and resistant drives of MFZ of German manufacture
- emergency manual control with a crank or by an infinite chain for an extra pay
- safe operation, the gates are certified according to ČSN EN
- safety fuse against fall of the door – prevent potential injury in case the motor gearbox is stripped
- fast and cheap repair in case the gates are smashed
- possibility of ventilation and transilluminating elements
Control options:
- by a triple-button from inside in the “dead-man” mode (necessity of permanent pressing the button throughout the time of the gates operation)
- pulsed control with optical protective ledge (no need of permanent pressing the button)
- combination of control both from inside and outside
- remote control
- detection of vehicle presence by means of induction loop
- detekce přítomnosti vozidel indukční smyčkou
- semaphore control of driving directions
Rolling industrial gates MAXIROL – Thermally insulated
We offer rolling thermally insulated industrial gates MAXIROL in multiple versions. The lamellas of which the gates are manufactured can be made of aluminium of steel metal plate. Depending on the size of the gates the material strength is used in the range from 0.36 to 1.5 mm.
In the basic design the steel lamellas are zinc-plated, aluminium lamellas are without surface treatment in natural design. If you pay extra, the gates can be painted in any shade you choose from the RAL sampler.
Steel gates can be also manufactured of stainless premium steel.
The gates are usually mounted from inside of a building, and the winding of the shutter is located behind the lintel.
Sometimes the gates can be placed on a façade of a building with a winding guard. The gates are suitable for industrial halls, blocks of flats, garage compounds, etc..
ADVANTAGES:
- manufacture of gates precisely according to the building situation
- possibility of big dimensions, width up to 12 m
- the gates do not need any space under the ceiling; they do not obstruct crane tracks
- winding on a shaft, possibility of a floating shaft that saves the surface of lamellas
- possibility of parking in front of the door
- thermal insulation with polyurethane or polystyrene
- seal at the floor by means of an end ledge and by means of an assembling ledge at the lintel
- as standard with an industrial motor for high frequency of operation
- top quality and resistant drives of MFZ of German manufacture
- emergency manual control with a crank or by an infinite chain for an extra pay
- safe operation, the gates are certified according to ČSN EN
- safety fuse against fall of the door – prevent potential injury in case the motor gearbox is stripped
- fast and cheap repair in case the gates are smashed
- possibility of ventilation and transilluminating elements
- possibility of acoustic gates with 46 dB damping – certified according to DIN 52210
Control options:
- by a triple-button from inside in the "dead-man" mode (necessity of permanent pressing the button throughout the time of the gates operation)
- pulsed control with optical protective ledge (no need of permanent pressing the button)
- combination of control both from inside and outside
- remote control
- protective photocells
- detection of vehicle presence by means of induction loop
- semaphore control of driving directions
|
Products 
579052693/0300
200094902/0300
